ZANKER ZKF680, User Manual

Page: 19 / 52

Information on acrylamides
Important! According to the newest scientific
knowledge, if you brown food (specially the one which
contains starch), acrylamides can pose a health risk.
Thus, we recommend that you cook at the lowest
temperatures and do not brown food too much.
Care and cleaning
Warning! Refer to the Safety chapters.
Warning! Deactivate the appliance and let it cool
down before you clean it. Disconnect the
appliance from the electrical supply before you do
cleaning or maintenance work.
Scratches or dark stains on the surface have no
effect on how the appliance operates.
• You can remove the pan supports to easily clean the
hob.
• To clean the enamelled parts, cap and crown, wash
them with warm soapy water and dry them carefully
before you put them back.
• Wash stainless steel parts with water, and then dry
them with a soft cloth.
• The pan supports are not dishwasher proof. They
must be washed by hand .
• When you wash the pan supports by hand, take care
when you dry them as the enamelling process occa-
sionally leaves rough edges. If necessary, remove
stubborn stains using a paste cleaner.
• Make sure you position the pan supports correctly
after cleaning.
• To make the burners work correctly, make sure that
the arms of the pan supports are in the centre of the
burner.
• Be very careful when you replace the pan sup-
ports to prevent the hob top from damage.
After cleaning, dry the appliance with a soft cloth.
Removing the dirt:
1. – Remove immediately: melting plastic, plastic
foil, and food containing sugar.
– Stop the appliance and let it cool down be-
fore you clean: limescale rings, water rings, fat
stains, shiny metallic discolorations. Use a spe-
cial cleaner applicable for surface of hob.
2. Clean the appliance with a damp cloth and some
detergent.
3. At the end rub the appliance dry with a clean
cloth.
The stainless steel can become tarnished if it is too
much heated. Refer to this you must not cook with pot-
stones, earthenware pans or cast iron plates.
Cleaning of the spark plug
This feature is obtained through a ceramic ignition can-
dle with a metal electrode. Keep these components well
clean to prevent difficult lighting and check that the
burner crown holes are not obstructed.
Periodic maintenance
Periodically speak your local Service Force Centre to
check the conditions of the gas supply pipe and the
pressure adjuster, if fitted.
19