ZANKER KIT6460XXK, Manual

Page: 27 / 60

Problem Possible cause Remedy
and a number come on.
There is an error in the hob. Deactivate the hob and activate it
again after 30 seconds. If
comes on again, disconnect the hob
from the electrical supply. After 30
seconds, connect the hob again. If
the problem continues, speak to an
Authorised Service Centre.
You can hear a constant beep
noise. The electrical connection is incor-
rect. Disconnect the hob from the electri-
cal supply. Ask a qualified electri-
cian to check the installation.
If you cannot find a solution...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
Give the data from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the corner of the
glass surface) and an error message that comes on.
Make sure, you operated the hob correctly. If not the
servicing by a service technician or dealer will not be
free of charge, also during the warranty period. The
instructions about the Service Centre and conditions of
guarantee are in the guarantee booklet.
Technical data
Rating plate
Model KIT6460XXK PNC 949 492 324 00
Typ 61 B4A 00 AA 220 - 240 V / 400 V 2N 50 - 60 Hz
Induction 7.35 kW Made in Romania
Ser.Nr. ................. 7.35 kW
ZANKER
Cooking zones specification
Cooking zone Nominal power
(maximum heat
setting) [W]
PowerBoost [W] PowerBoost maxi-
mum duration
[min]
Cookware diameter
[mm]
Left front 2300 3700 10 180 - 210
Left rear 1800 - - 145 - 180
Right front 1400 2500 4 125 - 145
Right rear 1800 - - 145 - 180
The power of the cooking zones can be different in
some small range from the data in the table. It changes
with the material and dimensions of the cookware.
For optimal cooking results use cookware no larger than
the diameter in the table.
27