Programmes
Programme
Degree of soil
Type of load
Programme phases
Consumption values
1)
Duration
(min)
Energy
(kWh)
Water
(l)
2)
Normal soil
Crockery and cut-
lery
•
Pre-wash
•
Wash 50 °C
•
Rinses
•
Dry
225
0.778
9.9
Heavy soil
Crockery, cutlery,
pots and pans
•
Pre-wash
•
Wash 70 °C
•
Rinses
•
Dry
160 - 168
1.1 - 1.3
13-14
Normal soil
Crockery and cut-
lery
•
Pre-wash
•
Wash 65 °C
•
Rinses
•
Dry
130 - 140
1.0 - 1.2
14-15
3)
Fresh soil
Crockery and cut-
lery
•
Wash 60 °C or
65 °C
•
Rinses
30
0.7
8
4)
All
•
Pre-wash
14
0.1
4
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes
can change the values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with nor-
mal soil. (Also, it is a standard programme for test institutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short period of time.
4) Use this programme to quickly rinse the dishes and to prevent the food remains from drying out on the dishes and to
reduce bad odour coming out from the appliance. Do not use detergent with this programme.
Settings
Programme selection mode
In the programme selection mode, it is possible to set a
washing programme and to enter the user mode to
change the appliance settings.
To enter the programme selection mode:
Press on/off button.
The indicator
is on.
If the control panel does not indicate that the appliance
is in the programme selection mode, follow the RESET
procedure.
RESET procedure
Use RESET to:
• Cancel a currently running programme.
• Stop the countdown of Delay option.
• Bring the appliance back to the programme
selection mode.
To RESET:
Press and hold simultaneously
and
until the
control panel indicates the appliance is in the
programme selection mode.
User mode
The user mode allows changing the following appliance
settings:
20
