Surface
mounting
power supply
14 V DC
8 W
ZNN-08-14
www
.ledix.pl
230 V AC
Surface mounting
power supply
14 V DC / 8 W
ZNN-08-14
The symbol means
selective collecting of
electrical and electronic
equipment.
It is forbidden to put the
used equipment together
with other waste.
ZNN-08-14 power supply is a professional impulse power supply with 14
V DC voltage stabilizer. It is designed for surface mounting. The nominal
power output is 8 W. The power supply is recommended to supply the
devices belonging to the LEDIX group. The product has a short-circuit
and overload protections, which increase the safety of its use. Its high ef-
ficiency and a very low power consumption in the standby mode, makes it
a very economical solution, designed for continuous operation. The power
supply meets the requirements of the harmonized standards.
Characteristic features:
• 14 V DC nominal output voltage, 8 W nominal power,
• low power consumption in the standby mode (0,25 W),
• efficiency at the level of 79%,
• high stability of the output voltage with input voltage or load changes,
• protections: short-circuit, overload,
• wide ambient temperature range: -10 ÷ +50
o
C,
• long-term operation reliability,
• output connecting cables 150 mm long.
The power supply cooperates with:
• LEDIX series LED diode fittings supplied with 14 V DC
• LED controllers and radio receivers supplied with 10÷14 V DC.
CAUTION: The total power of lighting fittings or of the devices cooper-
ating with the power supply must not exceed 8 W.
ZNN-08-14 ENG Ver. 01
Cet Lighting Sp. z o.o.
PL 43-200 Pszczyna
ul. Zielona 27, Poland
tel: +48 32 449 15 00, fax: +48 32 449 15 02
e-mail: [email protected], www.ledix.pl
230 V AC / 8 W IP56
weight: 105 g
PN-EN 61204-3; PN-EN 55022; PN-EN 61000
Declaration of Conformity is on www.ledix.pl
Surface
mounting
IP protection level: protection against dust and strong jets
of water - it is required to carry out an IP connection with
a degree not less than IP56
Outdoor
mounting
Output
voltage
14 V DC
SCAN
the technical
data
LED diode power supply for surface mounting
14 V DC 8 W
TYPE: ZNN-08-14
A detailed moun
ting instruc
tion is in the pack
ag
ing
