EDM - 02 SIGNALLING MODULE
INSTRUCTION MANUAL
Zakład Mechaniki i Elektroniki
ZAMEL
sp.j.
J.W. Dzida, K. Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamelcet.com,
e-mail:
FEATURES
TECHNICAL DATA
DESCRIPTION
APPERANCE
ی Applicable in signalling and con
-
trol systems,
ی Acoustic module,
ی Reset button,
ی LED indicator built in a reset but
-
ton,
ی Relay voltage output, NO / NC,
ی Single-module casing,
ی Mounted on TH 35 rail.
The EDM-02 signalling module may be
used in various systems, where acous
-
tic alarm is needed. The module is fitted
with a button for acoustic signal reset
and switching OFF a relay. There is a
LED placed inside a push button for
power supply indicating.
EDM - 02
Power terminals:
L, N
Rated voltage: 230 V~
Rated voltage tolerance: -15 ÷ +10 %
Rated frequency: 50 / 60 Hz
Rated current: 31 mA
Relay switch-ON control: piezoelectric loudspeaker
Relay contacts parameters: 16 A NO/NC 4000 VA AC1
Connection terminals quantity: 5
Connection wire section: 0,2 ÷ 2,50 mm
2
Operating temperature: -20 ÷ +45
o
C
Operating position: optional
Casing fastening: TH 35 rail (according to PN-EN 60715)
Casing IP: IP20 (PN-EN 60529)
Protection class:
II
Overvoltage category:
II
Pollution level:
2
Dimensions: single-module (17,5 mm) 90x17,5x66 mm
Weight: 70 g
Standard conformity: PN-EN 60669-1; PN-EN 60669-2-1
PN-EN 61000-4-2,3,4,5,6,11
C
ont
r
o
l
k
e
y
P
iez
o
ele
ct
ri
c
l
o
udspea
k
er
Power supply signalling
Po
wer lead
(
L
)
Po
wer lead
(
N
)
The device should be
connected to a single-
phase system accordin
-
gly to current standards.
The device connections
will be described in this
manual. Only qualified electricians are
allowed to mount, connect and adjust
the bell. It is necessary to read this ma
-
nual before the device mounting. Do not
disassembly the timer casing or you will
lose any warranty rights and expose
yourself to the electric shock hazard.
Before mounting operation make sure
of disconnecting the connection wires
from the electric network. Use a cross-
head screwdriver of 3.5 mm diameter
to mount the device. The bell should
be carried, stored and used in an ap
-
propriate way. Do not mount the bell in
case of any device parts lack, damage
or deformation. In case of malfunction
please notify the manufacturer.
CAUTION
