ZALMAN Trimon ZM-M215W User Manual Download Page 1

 

1

 

 

ZM-M215W User

s Guide

 

 

 

FCC STATEMENT 

 

This equipment has been tested and found to comply with the limits for a 

Class B digital device pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio 
frequency energy and if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures: 
 

 Reorient or relocate the receiving antenna. 

 Increase the separation between the equipment and receiver. 

 Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected. 

 Consult the dealer or an experienced radio/TV technician for help. 

 Only shielded interface cable should be used. 

 

Finally, any changes or modifications to the equipment by the user not 

expressly approved by the grantee or manufacturer could void the user’s 
authority to operate such equipment. 

 

Summary of Contents for Trimon ZM-M215W













Reviews: