500 Watt Subwoofer
Amplifier
Model: DSW-500N
User Manual
Zachry-audio.com
Page 1: ...500 Watt Subwoofer Amplifier Model DSW 500N User Manual Zachry audio com ...
Page 2: ...erload conditions Features RCA and balanced level inputs for connection to any system Full frequency balanced level outputs Soft clip circuitry provides clean output even with demanding program material Full complement of protection circuits for extreme reliability Reverse phase switch for best integration with satellites Bypass gives fully frequency to the inbuilt amplifier Switchable stereo mono...
Page 3: ...Hz with slop of 24 dB per octave If you are using the system for music and your main speakers have good bass capability you could set the control to a fairly low value at 40 60 or even 100 Hz If the main speakers are smaller or do not have much bass output set the control higher Experiment with the amount of overlap that you experience when all speakers are playing in the same range This can be he...
Page 4: ...rounded outlet SPECIFICATIONS Rated Power Output 300 watts RMS into 8 ohms 0 1 THD 500 watts RMS into 4 ohms 1 0 THD Signal to Noise Ratio 90 dB A weighted Input Impedance 12K ohms Sweep Control 30 200 Hz 24 dB per octave Subsonic Filters OFF 20 35 50 Hz Other Controls Phase 0 NOR or 180 REV LPF Filter HPF Filter Stereo Mono and Bypass switch Dimensions 304 mm W x 304 mm H x 135 mm D Power Require...
