Z A A Z | U S E R M A N U A L 5
Z A A Z | U S E R M A N U A L 4
ASSEMBLY INSTRUCTIONS
This advanced design is ergonomically designed and maintains a high level of reliability
and smooth noiseless functionality.
PACKAGING:
Retain all packing materials for your 20K until you are certain you have all components.
COMPONENTS:
The ZAAZ 20K components include the Vibration unit, post, console, handlebars, tool kit,
power cord and User’s Manual.
1.
Remove all packaging.
5.
Unscrew the 4 screws on both sides of the
base, (2 at the front and 2 at the back).
3.
Connect the 2 cables to the base.
2.
At the top of the post, insert the 2 cables
through the small hole in the middle so they
protrude out both ends. Grip the top of each
cable and don't let it fall into the post.
4.
Affix the post to the base with the 4 bolts,
using the screwdriver provided or a 12 mm
socket wrench.
6.
Starting with the left handlebar, connect
and screw the handle pieces (A and B) with the
plastic connector (C). Then connect piece D to
the plastic connector. Put the two handlebars
onto the end tubes simultaneously.
NOTE
Tighten all screws only 3 or 4 turns at first.
Tighten the screws until snug (not over-tight)
when assembly is finished.
