ZCube-SC User Guide
DOC-USR-0265-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
44
(5)
You can return to the use of limited settings by un-checking the
Advanced Settings
box in the
System Setup tab and saving that to the preset.
8.3
Encoder ROI
The ZCube-SC allows for the encoding of a Region of Interest (ROI) in the captured video. This allows the
encode of only the region of the video you are interested in.
(1)
Click on the Ch1 tab and stop the stream with the
Stop
button, if necessary.
(2)
Next to the Output Resolution dropdown, check the ROI checkbox. ROI options will appear below the
checkbox. Including a screenshot from the video source.
(3)
Resize and Drag the selection box to indicate the desired ROI.
(4)
When satisfied with the selection, click
Start
to begin encoding. Only the selected area will be
encoded.
Figure 42 Channel 1 Tab with ROI
8.4
Overlay Timestamp
The ZCube-SC supports the overlay of a system timestamp on the video stream. This is done via the Text
Overlay feature on the encoder tab.
(1)
Click on the CH1 tab and stop the stream with the Stop button, if necessary.
(2)
On the right side of the page select True in the Text Overlay Enable dropdown.
(3)
The Overlay Text box will appear. Add {ts} to the text box and click the Start button.
(4)
The date and time will be overlayed on the video stream in YYYY-MM-DD HH:MM:SS format.
