Z3Stream-SDI User Instructions
DOC-USR-0117-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
Z3Stream.com
43
9.3
The Status Tab
Note:
This tab may take a few seconds to load.
Output Value
Description
Video Status
CH
The Z3Stream-SDI is a single channel encoder. This will always be 1.
Bitrate (Kbps)
Current target bitrate of encoder
Actual Bitrate
Actual bitrate being output by encoder
FPS
Current target frames per second of encoder
Actual FPS
Actual frames per second being encoded
Key-frame FPS
Number of key-frames per second (for example, a value of 0.5 means a key frame
is inserted every two seconds)
Width
Width of encoded picture
Height
Height of encoded picture. The letter “I” will appear if interlaced is being
encoded.
Audio Status
Channel
The Z3Stream-SDI is a single channel encoder. This will always be 1.
Subchannel
The Z3Stream-SDI is a single channel encoder. This will always be 1.
Codec
The codec being used to encode audio
Stream Status
Channel
The Z3Stream-SDI is a single channel encoder. This will always be 1.
URL
The URL the channel is being streamed to.
Frames
Number of frames sent from encoder to channel since the beginning of encoding.
This can serve as a quick sanity check (for example, you can click “Refresh”, count
to 10, click “Refresh” again, and you should see an increase of around 600 for 60
frames per second content).
Input Status
Input
Input type.
Resolution
Capture resolution for that input.
FPS
Capture frames per second for that input.
Refresh Button
Refresh the current status values.
Auto Refresh
Checked
Unchecked
If checked, the values in the status tab will be refreshed
automatically once every five seconds.
