DOC-USR-0135-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
57
Stream Status
channel
The channel number (1, 2 or 3)
URL
URL the channel is being streamed to
frames
# of frames sent from encoder to channel since the beginning of encoding. This
can serve as a quick sanity check (for example, you can click “Refresh”, count to
10, click “Refresh” again, and you should see an increase of around 600 for 60
frames per second content).
Input Status
Input
Input type
Resolution
Capture resolution for that input
FPS
Capture frames per second for that input
Refresh
Refresh the current status values.
Auto Refresh
If checked, causes the values in the status tab to be refreshed automatically
once every five seconds.
9.4
The MPTS Tab
Parameter
Options (default in bold)
Notes
Rate
1-80M (
24M)
The total transport rate of the MPTS stream. This
should equal the bitrates of all channels going into this
stream plus at least a 10% overhead. For example, if
two 10Mbps channels are being packed into the MPTS
stream, the recommended Rate is at least 22Mbps.
Destination 1
ASI
UDP
NONE
Used to define where the multiple channels will be
routed to after being combined into one stream.
“ASI”
is not supported by Z3-SBE264-10
hardware. “UDP”
must be selected.
Destination 2
ASI
UDP
NONE
An optional second destination for the MPTS streams.
“ASI” is not supported by
Z3-SBE264-10 hardware.
“UDP” must be selected.
