Z3 Technology Z3-Q603-RPS User Manual Download

Page: 34 / 68

CONFIDENTIAL

DOC-USR-0239-04

____________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

13.15

Encoding Composite Video

The Z3-Q603-RPS also supports encoding from a composite video source. If this is desired, a composite
U.FL to BNC male adapter cable is needed.

(1)

Connect the yellow connector to the composite output of your video source.

(2)

Connect the red and white connectors to the analog audio outputs of your video source.

(3)

Connect black connector to “A/V In”

on the RPS.

(4)

Return to the user interface.

(5)

If necessary, click on the “

Stop

” button in the “

Channel Controls

” section of the user interface CH1

tab or the “

Stop All

” button in the lower right corner of the screen of any tab.

(6)

At the CH1 tab,

change the “Vide

Source” to “Composite” using the dropdown menu.

(7)

Verify your remaining settings are as desired. See Section 16.0 for a detailed list of all options.

(8)

Click the “Start” button.

(1) Change to

“Composite”

(

2) Click “Start”

Figure 26 Channel 1 Tab

–

Composite Encode

Figure 25 Composite Adapter Cable

Summary of Contents for Z3-Q603-RPS





































































Search results

Summary of Contents for Z3-Q603-RPS

Reviews:

Related manuals for Z3-Q603-RPS

Brands by name

Popular brands

Z3 Technology Z3-Q603-RPS, User Manual

Search results

Summary of Contents for Z3-Q603-RPS

Reviews:

Related manuals for Z3-Q603-RPS

Brands by name

Popular brands