DOC-USR-0068-02
_______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
51
10.3
The Status Tab
Note
:
May take a few seconds to load after being clicked
Output Value
Explanation
Video Status
CH
The channel number (1-4).
Bitrate (Kbps)
Current target bitrate of encoder.
Actual Bitrate
Actual bitrate being output by encoder.
FPS
Current target frames per second of encoder.
Actual FPS
Actual frames per second being encoded.
Key-frame FPS
# of key-frames per second (for example, a value of 0.5 means a key frame is
inserted every 2 seconds).
Width
Width of encoded picture.
Height
Height of encoded picture. If interlaced is being encoded, the height shown will be
that of 1 field (for example, if 1080i is being encoded, the height will be “540”).
Audio Status
Channel
The channel number (1-4).
Subchannel
Always 1 in this release.
Codec
The codec being used to encode audio for that channel.
Stream Status
Channel
The channel number (1-4).
URL
URL the channel is being streamed to. If MPTS is being used for a channel, the URL
will state “mpts.”
frames
# of frames sent from encoder to channel since the beginning of encoding. This can
serve as a quick sanity check. For example, you can click “Refresh”, count to 10,
click “Refresh” again, and you should see an increase of around 600 for 60 frames
per second content.
Input Status
Input
Input type (always HD-SDI for this release).
Resolution
Capture resolution for that input.
FPS
Capture frames per second for that input.
Refresh
Refresh the current status values.
Auto Refresh
If checked, causes the values in the status tab to be refreshed automatically once
every five seconds. Click “Refresh” to start the refresh.
