Z3-LEO-1X User Instructions
DOC-USR-0217-02
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
40
8.0
PERFORMING OTHER OPERATIONS WITH THE Z3-LEO-1X
8.1
Save Current Settings
If you have a specific configuration you’d like to preserve, you can save it so that when the Z3-LEO-1X is
powered off and back on, it automatically boots to those settings.
(1)
In the
preset
dropdown menu located at the bottom of any screen, select
--- new preset ---
.
(2)
A textbox will appear. Enter your desired preset name. In the pictured example,
z3_config1
is used.
(3)
Click
ok
.
(4)
Select your newly created configuration from the preset dropdown menu at the bottom of the
screen.
(5)
As soon as you select
z3_config1
, the screen will reload.
(6)
Change your desired settings.
(7)
Once your changes have been set in this configuration, click on the
Save
button.
(8)
A pop-up window appears to confirm the saving of these settings is complete. Click
OK
.
(9)
In order for changes to network settings to take effect, the unit must be re-started. Click the
Reboot
button in the System Setup tab, or power the unit off by unplugging the power supply. Then
plug the power supply back in and wait 15-30 seconds for the unit to boot up.
Figure 35 The User Presets Tab
Figure 36 Entering a User Preset Name
Click “Save”
Figure 37 Saving a User Preset
(1) Type New Preset Name
Select “--- new preset ---“
(2) Click “ok”
