DOC-USR-0078-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
22
7.0
PERFORMING OTHER OPERATIONS WITH THE Z3-HE4K-R4
7.1
Saving Current Settings
If you have a specific configuration of settings that you would like to preserve, you can save it so that
when the Z3-HE4K-R4 is powered off and back on, it automatically uses those settings. For an example of
doing this, please see the description in Section 6.6, “Using DHCP” on page 16.
7.2
Making a Firmware Update
(1)
Run the Web Interface (Steps (1)-(12) in Section 6.0).
(2)
In the System Setup Tab, click “update device firmware”:
*Note:
If “update device firmware” is not selectable, it is because the encoder is running. If you click
“Stop” at the bottom of the screen, then “update device firmware” will become active.
(3)
This brings you to the Software Updater screen. Click “Browse” and browse to the image file you
wish to update.
(4)
Click “Open.”
(5)
Click “Upload and Update.” You should see a “FLASH Update now in progress” message. Once
finished it will go back to the main menu.
(6)
You should be able to now run using the updated image.
Click here
Figure 25 Updating the Device Firmware
