DOC-USR-0096-06
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
28
6.14
Tuning for Latency
In general, streaming using RTP will result in lower latency than streaming using TS.
If streaming to the VLC media player, latency can be reduced on the decode side by adjusting the
network caching value. By default, this is set to 1000ms. You can lower this to as low as 200ms. To do
this, go to the following:
VLC
→
Tools
→
Preferences
→
Show Settings (ALL)
→
Input / Codecs
→
Network caching (ms)
6.15
Stream Multiple Resolutions
The Z3-DME-10 supports simultaneous encode into up to three different resolutions, bitrates and output
formats. Each output stream can be set using a separate channel tab. If the CH2 tab is not present,
you can create a second channel by clicking on the
+
tab.
6.16
Record to USB
The Z3-HE1080-RPS supports writing encoded video to a storage device connected to the USB port in .ts
file format.
(1)
Connect a USB flash drive or other USB storage device to one of the USB inputs on the back of the
unit.
*
Note:
The USB drive must be formatted in either FAT32, VFAT, EXT3, or EXT4 format.
Figure 23 Create Additional Output Channels
Click the “+” Tab
