7
CONFIDENTIAL
DOC-PRO-0049-02
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
Figure 8 Taping the fan wire
(7)
Place the combined PCBA and align it properly to match the screw holes (positions 1, 2, 3, 4 in the
picture below). Screw in the 4 silver pan head screws in the order shown by the numbers below.
Use the
torque screwdriver at 10 lbs torque.
Figure 9 Screwing the PCBA to the enclosure
(8)
Connect the fan wire to the Z3-DM8107-APP-21 at J15.
Figure 10 Location of J15
(9)
Reposition the red LED on the Z3-DM8107-APP-21. The LED must be 3mm from the switch. The switch
1
3
2
4
