20
CONFIDENTIAL
DOC-USR-0054-02
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
5.9
Running DHCP
DHCP is also supported. When enabled, the Z3-DME-02 dynamically receives an IP address to use at
startup. The IP address that is assigned can be seen through the ZFinder tool running on a PC. To see
how DHCP support works, you can do the following steps:
(31)
The first thing you need to do is set up a custom configuration so that the DHCP setting is used the
next time the system boots up. To do this, click on the “User Presets” tab and click on “new”:
(32)
This brings up a new text box to enter the preset name. Type “z3_test” and click “ok”:
Figure 20 The User Presets Tab
(1) Click “User Presets” Tab
Figure 21 Entering a User Preset Name
