CONFIDENTIAL
DOC-USR-0010-09
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
30
(d)
Add an entry for the file system directory in /etc/exports. For example, the line would
be similar to the following (here, 192.168.0.6 is the IP address of the PC, and
255.255.0.0 is the netmask):
/home/z3/z3-netra/filesys/fs
192.168.0.6/255.255.0.0(no_root_squash,insecure,nohide,rw,async)
(e)
Create symbolic links in your top-level directory to allow access to your filesys and
images directory (note: actual directory name may be different depending on your
specific release):
# cd /home/z3/z3-netra
# ln –s z3-netra-DM8169_VI_RPS-20140405/images images
# ln –s z3-netra-DM8169_VI_RPS-20140405/filesys filesys
(f)
Start the NFS server
# sudo service nfs-kernel-server restart
(3)
Configure u-boot on your board to match your system configuration settings
(a)
Reboot the board with minicom or TeraTerm setup on your PC (see Steps (5) and (6) in
Section 5).
(b)
As soon as u-boot starts, press the space bar immediately to make it stop in the u-boot
prompt.
(c)
The next step is to prepare the environment variable script to match your own
environment settings. Go to the u-boot directory in the release directory and edit the
file “u-boot-env-netra.txt” (here emacs is used – any text editor can be used)
# cd /home/z3/z3-netra
# cd z3-netra-DM8169
_
VI
_
RPS-20140405
# cd u-boot
# emacs u-boot-env-netra.txt
