CONFIDENTIAL
DOC-USR-0012-08
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
55
frames
# of frames sent from encoder to channel since the beginning of encoding. This
can serve as a quick sanity check. For example, you can click “Refresh”, count to
10, click “Refresh” again, and you should see an increase of around 600 for 60
frames per second content).
subchannel
Used to indicate the subchannel being used for encode. For the DM8107-RPS, the
subchannel will always equal 1 and will always have an entry of “audio”.
channel
Indicates the audio codec being used to encode a specific audio subchannel.
Input Status
Input
Input type
Resolution
Capture resolution for that input
FPS
Capture frames per second for that input
Decoder Status
channel
Channel being decoded
URL
Source of the stream/file being decoded
frames
# of frames decoded so far
fps
Fps being decoded
10.4 The CH1 Tab -- Encode
Parameter
Options (default in bold)
Notes
Video Source
HDMI1
Component1
Composite1
Where to get input for channel 1.
Video Resolution
320x180 – 1920x1080
Follow input
The input resolution for channel 1 [
Note 1
].
“Follow input” will cause the capture
resolution to be used.
Video Bitrate
100 – 12000K (
6000K
)
The bit rate for channel 1.
Video Profile
High
Main
Baseline
The H264 profile of the bitstream. Generally
High is used for > D1, Main for D1, and
Baseline for < D1.
