CONFIDENTIAL
DOC-USR-0012-08
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
20
5.5 Ensure your PC has a proper IP address
(8)
To be able to communicate with the board, the PC that you are communicating from needs to
have the same first 2 parts of the IP address. For example, if the board has an IP address of
192.168.81.07, your PC would need to have an address of 192.168.x.y, where x.y is anything but
81.07 (and not conflicting with what is on your current network). Ensure that this is the case. If
necessary, use the “P” and “N” options to modify the address/network of the board to conform to
your network. Note that the first 2 parts being the same are based on a value of netmask of
255.255.0.0. If netmask were 255.255.255.0, for example, then the first 3 parts of the IP address
would have to be the same.
After you are done, make note of the address you set it to. This will be important in the
streaming step.
5.6 Run the Web Interface to Configure CH1
(9)
In your PC, run a web browser (Z3 recommends FireFox or Chrome). In this browser, type the IP
address of the board noted in step (7) (for example, if the default value is used, it would be
http://192.168.81.07). After about 3 seconds, the control menu should come up:
(10)
Click on the “CH1” tab
Figure 7 Web Interface Initial Screen
