manualshive.com logo in svg

Z3 Technology Sitara Z3-AM572x-RPS, User Instructions

Share
Download
Z3 Technology Sitara Z3-AM572x-RPS User Instructions Download Page 11

11

 

 

CONFIDENTIAL 

DOC-USR-0089-03 

 

____________________________________________________________________________________

 

Z3 Technology, LLC 

♦

 100 N. 8th St. STE 250 

♦

 Lincoln, NE 68508-1369 USA 

♦

 +1.402.323.0702 

 

   CODE OVERVIEW 

6.0

 

Once you have untarred the code, you will see the following top-level directories: 

 

 

bin 

Scripts for setup and image generation 

 

 

board-support 

U-Boot, Linux BSP and drivers 

 

 

docs 

Software manifests and pointers to wiki docs on the Web 

 

 

 

example-applications  Matrix GUI and some of its examples 

 

 
   

filesystems 

Base filesystems from TI OpenEmbedded build 

 
 

linux-devkit 

Toolchain and development libraries 

 

 

targetNFS      

The development filesystem for release 

 

 

z3 

Software packages from Z3 Technology 

 
The Z3-AM572x-RPS source code is based on Processor SDK 2.00.01.47.  Z3 has modified the board-support 
(U-Boot and Linux) to support Z3 hardware.   The z3 directory contains software packages developed by Z3 
Technology, LLC.  The z3 directory is described in more detail in the next section. 
 

6.1

 

 The z3 Directory 

 

There are 3 main subdirectories:  matrix_gui, adv7611, and edid 

 

6.1.1

 

 matrix_gui 

 

This directory contains the code for adding applications to the Matrix Launcher GUI on the HDMI 
output. 

 

6.1.2

 

 adv7611 

 

This directory contains initialization scripts for the HDMI input device driver. 

 

6.1.3

 

 edid 

 

This directory contains the base code for rtp tx and rx, as well as the base code for audio capture 
and output. 

 

6.2

 

Processor SDK Documentation 

 

Most of the processor SDK documentation is available online at Texas Instruments’ website. The software 
developer’s guide is recommended:  

http://processors.wiki.ti.com/index.php/Processor_SDK_Linux_Software_Developer%E2%80%99s_Guide

  

 

 
The following are some additional links of interest: 

 

Summary of Contents for Sitara Z3-AM572x-RPS























Reviews:

No comments

Brands by name

Popular brands

Load more brands