Z3 Technology HETM-DCK-21 User Instructions Download Page 13 | Manualshive

Page: 13 / 83

background image

HETM-DCK-21 User Instructions

DOC-USR-0202-01

______________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

th

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

13

5.2

Access the User Interface Using ZFinder

ZFinder is a PC utility that allows you to find any Z3 Technology product on your network. If you have
not yet downloaded this to your computer, you can find this program at

Z3Cam-4K.Z3technology.com

(1)

Verify your PC is set to DHCP. If it is set to a static IP address, ZFinder may be unable to discover
your camera.

Note:

The HETM-DCK-21 is set to DHCP by default. If no DHCP server is available on the network, a static IP

address of

192.168.0.120

and a netmask of

255.255.0.0

will be assigned. The IP address can be manually

entered as the URL in a browser window to access the user interface.

(2)

Run the ZFinder PC utility on your PC. You may need to allow it past any firewalls or security
programs on your PC. The ZFinder window appears and completes a scan of the network. ZFinder
then lists all Z3 systems connected to the network. The HETM-DCK-21 appears as the Z3Cam-4K.

(3)

Click on the Z3Cam-4K entry in the window to select it. This will cause the

Edit Device

,

Open

Device

and

Flash LEDs

buttons to activate.

Figure 5 ZFinder with the HETM-DCK-21 Selected

Note:

Selecting Edit Device allows for manual changes to network settings. See Section 10.9, ZFinder, for more

information.

Note:

If the device appears in red, there is a network error, and network settings will need to be modified in

order to access the user interface.

(4)

Click on

Open Device

. An internet browser window is opened in your default web browser (for best

results, Firefox or Chrome are recommended) and the user interface appears with the System Setup
tab open.

«
...
11
12
13
14
15
...
»

Summary of Contents for HETM-DCK-21




















































































Reviews:

No comments

Related manuals for HETM-DCK-21

Brand: LAWO Pages: 154

Brand: Keithley Pages: 59

Brand: M86 Security Pages: 46

Brand: EVOC Pages: 57

Enterasys Matrix 2G4082-25

Brand: Enterasys Pages: 58

Brand: Ista Pages: 16

Brand: Smacq Technologies Pages: 22

Brand: Comelit Pages: 140

PROM Programming Adapters PCA7438F-64A

Brand: Renesas Pages: 18

SRCSASPH16I - RAID Controller

Brand: Intel Pages: 28

EK-Quantum Vector TUF RX 6800

Brand: ekwb Pages: 14

STM32MP157 Series

Brand: ST Pages: 47

Brand: FDI Pages: 15

Brand: Cognex Pages: 57

Brand: Zhone Pages: 494

Brand: ebm-papst Pages: 13

Brand: Data-Tronix Pages: 15

Brand: LG Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands