HE4K-DCK-10 User Instructions
DOC-USR-0123-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
39
7.3
Color Controls
(5)
Select from a variety of supported white balance configurations using the
White Balance Mode
dropdown menu.
(6)
Adjust
Color Gain
and
Color Hue
using the sliders.
(7)
Use the button options to adjust to your desired
Color Suppress
settings.
7.4
Sony VISCA Camera Control
The HE4K-DCK-10 leverages Sony 4K camera technology. Remote control of the camera video input is
supported by Sony’s VISCA™ protocol. VISCA commands can be sent from a remote PC using the same IP
connection that carries the video. Control actions include zoom, focus, aperture and more.
To complete the following instructions, a Windows PC with Com2TCP
4
and your camera controller
software downloaded is required.
7.4.1
Com2TCP Setup
(1)
If you have not already done so, install the Com2TCP application onto your PC. (For Windows 8 or
above, use v1.4.6.) Com2TCP is an application supporting remote access and is available online.
(2)
Launch the Com2TCP application.
(3)
Set the
Remote IP
field to the IP address of your HE4K-DCK-10. This can be found using ZFinder or
as the URL of the web browser with the user interface open.
(4)
Set the
TCP Port
to
1000
. This value must match the
VISCA Control TCP Port
value listed in the
4
Com2TCP is an application available for download online that allows for remote control of any serial device via IP.
Figure 38 Color Controls
