HE2K-DCK-1X User Instructions
DOC-USR-0122-05
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
62
USR-0164-0x for more information
Set 802.1X
Sets configuration for 802.0x on the wired
connection. See
DOC-USR-0161-0x for details.
Configure FPGA*
Configures FPGA config for DCK-XX unit. Z3 ships
DCK units with expected FPGA config, but changes
to the hardware configuration of DCK may require
a change to the FPGA config. Most customers will
not need change this setting.
Configure
ONVIF*
Enable/Disable ONVIF and control number of
cameras to advertise to ONVIF clients.
Set Term Server
Enable/Disable remote terminal server.
Set ZFinder
Enable/Disable ZFinder support on unit.
Update device
firmware Button
Access the Software Updater to update the
firmware on your device. An image file of the
desired firmware is needed.
Download
support logs
Button
Extract a set of diagnostic logs that can be
provided to Z3 in the event of an issue to be
reported. The resulting file is saved on the PC with
the user interface open.
Reboot Button
Restarts the unit without the need to disconnect
power.
10.2
The User Presets Tab
Button
Notes
new
Define a new configuration file.
Up to nine configurations can be created.
rename
Rename a configuration file.
delete
Delete a configuration file.
export
Export current settings to a file.
import
Load settings from a previously exported file.
