FV4K-DCK-1X User Instructions
DOC-USR-0127-07
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
83
Delete Button
Removes channel instance for encoding.
status
!Not running,
IDLE, STOPPED,
RUNNING,
POLLING
Current status of the encode process.
IDLE
indicates no valid input data is present.
STOPPED
indicates that the unit is not
currently encoding. Must be in this mode to
make any configuration changes.
POLLING
indicates “start” was pressed and
the encoder is waiting for valid input data to
be detected.
RUNNING
indicates the unit is currently
encoding.
Error statuses will be preceded by an
exclamation point and include a description
of the error.
Note 1: Encode Resolutions Supported:
1080p (2MP), 1280x1024, 720p (1MP), 480p, 576p, 1024x576, 704x576, 640x480, 640x360, 420x380,
352x576, 352x288, 352x240, 320x240, and 320x180
Follow input
“Follow input” = Generate encoder resolution based on capture resolution detected
10.7
The CH2 Tab (Channels 2)
The FV4K-DCK-1X supports simultaneous encode into multiple different resolutions and bitrates. Each
output stream can be set using a separate Channel tab. See the CH1 Tab section for detailed descriptions
of available settings on the CH2 and CH3 tab. If these tabs are not present, you can create a them by
