FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
41
(3)
Verify
Audio Enable
is set to
True
and set your desired values for
Codec
,
Sample Rate
and
Bit Rate
.
(4)
Select the appropriate option from the
Source
dropdown menu corresponding to your microphone:
a.
MIC Line-In
should be used with non-powered/non-amplified microphones.
b.
MIC
should be used with powered/amplified microphones.
(5)
Set
Audio Enable
to
False
to disable encode of the audio input.
6.11
Composite Pass-Through
The FV2K-1XA allows for the currently encoded content to be passed through to the Composite output
while the unit is streaming. This allows the camera content to be viewed on a TV or other display
monitor.
(1)
To view this pass-through content, verify the unit is currently encoding. The channel status will
show
RUNNING
in the bottom right corner of the user interface.
(2)
Connect a composite video cable from
CVBS
on the camera to a TV or display monitor.
Figure 36 CH1 Tab Configuration – Microphone Audio Settings
(1) If necessary, click “Stop”
(5) Click “Start”
(3) Set values
(2) Verify is
“True”
(4) Set to correspond
with microphone
