FSDI-DCK-10 User Instructions
DOC-USR-0313-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
34
6.7
Record to USB
The FSDI-DCK-10 supports writing encoded video to a storage device connected to the USB port in .ts file
format.
(1)
Connect a USB flash drive or other USB storage device to
USB
on the back of the camera.
Note:
The USB drive must be formatted in either FAT32, VFAT, EXT3, or EXT4 format.
(2)
Return to the user interface, and if necessary, click on the
Stop
button in the
Channel Controls
section of the user interface CH1 tab or the
Stop All
button in the lower right corner of the screen of
any tab.
(3)
Verify the
Output Resolution
is set to
Follow Input
to output a HD stream. If a lower resolution
output is desired, select this in the dropdown menu and resizing will occur.
(4)
Select the
Video Codec
you would like to use for your video encoding.
(5)
Under Output Setup, select
TSFILE
from the
Output Format
dropdown menu.
(6)
Click on the
Output Device
field to select your USB storage location. This will automatically populate
if a USB is detected.
(7)
In the
File Prefix
textbox, enter the desired prefix for your .ts file name.
a.
When saved, a number will be automatically generated and added to the end of the file
prefix, starting with zero. If subsequent recordings are made to the same USB, existing files
with the same prefix will be detected and the new recordings will auto-increment to the next
number.
Connect Storage
to USB 2.0 Port
Figure 33 USB Connection
