Z3 Technology FSDI-DCK-10, User Manual

Page: 33 / 75

FSDI-DCK-10 User Instructions
DOC-USR-0313-01
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
33
6.5.3 Recommended Settings:
When streaming HD video in HEVC/H.265 mode, the following recommended settings can be used for
the best results:
Output
Format Rate
Control
Bitrate
VLC Network
Cache
Notes
RTSP CBR 2 Mbps 300 ms Best latency (approx. 400 ms), no frame skips
TSRTP CBR 3 Mbps 1000 ms @ 300 ms, frame skips; @ 1000 ms, no frame skips
UDP CBR 3 Mbps 1000 ms @ 300 ms, frame skips; @ 1000 ms, no frame skips
6.6 Stream Multiple Resolutions
The FSDI-DCK-10 supports simultaneous encode into up to three different resolutions, bitrates and
output formats. Each output stream can be set using a separate channel tab. If the CH2 tab is not
present, you can create a second channel by clicking on the
+
tab.
Figure 32 Create Additional Output Channels
Click the “+” Tab
Figure 31 Recommended Settings