Z3 Technology FSDI-13A-RPS, User Manual

Page: 52 / 64

52
DOC-USR-0264-05
____________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N. 8th St. STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
15.2 The User Presets Tab
Button Notes
new Define a new configuration file.
Up to nine configurations can be created.
rename Rename a configuration file.
delete Delete a configuration file.
export Export current settings to a file.
import Load settings from a previously exported file.
reset Resets presets
15.3 The Status Tab
*Note: May take a few seconds to load after being clicked
Output Value Explanation
Video Status
CH The channel number (1 - 3)
Bitrate (Kbps) Current target bitrate of encoder
Actual Bitrate Actual bitrate being output by encoder
FPS Current target frames per second of encoder
Actual FPS Actual frames per second being encoded
Key-frame FPS
# of key-frames per second (for example, a value of 0.5 means a key frame
is inserted every two seconds)
Width Width of encoded picture
Height Height of encoded picture. A small “i” will appear if interlaced is being
encoded.
Audio Status
Channel The channel number (1 - 3)
Subchannel Always 1 in this release
Codec The codec being used to encode audio for that channel
Stream Status
channel The channel number (1 - 3)
URL URL the channel is being streamed to
frames # of frames sent from encoder to channel since the beginning of
encoding. This can serve as a quick sanity check. (For example, you can
click
“Refresh”, count to 10, click “Refresh” again, and you should see an
increase of around 600 for 60 frames per second content).
Input Status
Input HDMI1 refers to the captured content from the camera lens
Resolution Capture resolution for that input
FPS Capture frames per second for that input