background image

z-K6 manual

  

© 2001, Z-Systems Audio Engineering

 

The z-K6 K-Surround Processor 

 

 

 
 
Introduction........................................................................................................................................................... 2 
Making Physical Connections ............................................................................................................................... 3 
Front Panel Controls ............................................................................................................................................. 3 
Controlling Channel Output Levels ..................................................................................................................... 4 
Controlling Front Ambience................................................................................................................................. 4 
Controlling Surround Extraction ......................................................................................................................... 6 
Controlling Front Ambience Equalization........................................................................................................... 7 
Controlling Surround Equalization...................................................................................................................... 8 
Bypassing the z-K6................................................................................................................................................. 8 
Saving and Loading Presets ................................................................................................................................... 8 
MIDI Automation................................................................................................................................................ 10 
Adjusting Sample Rate & Wordwidth ................................................................................................................ 11 
Specifications........................................................................................................................................................ 12 

 
 

 
 
 

 

 
 
 
 
 
 
 

 

Important note: 

 
The z-K6 does not auto-detect the input sample rate.  You must select the sample rate 
manually.  Please make note of this and always make sure that the selected sample rate 
matches the incoming sample rate.  This will change on subsequent firmware revisions. 
 

 
 
 
 
 

 

Summary of Contents for z-K6













Reviews: