EN: Brief description of ZM12
(1)
Warning label (bulk)
(3)
M12 thread with two nuts
(2)
Internal focus hole
(6)
Industrial M12 plug
Welcome to ZM12 series!
ZM12B / ZM12TB (Basic)
ZM12DM / ZM12TDM
ZM12DM5 / ZM12TDM5
Mechanical speci
fi
cations *
Dimensions ZM12T
(thread laser)
81,5mm x Ø M12 (focusable version)
81,5 mm x Ø M12 (focusable version)
65mm x Ø M12 (focusable version)
Dimensions ZM12
(incl. optic head)
81mm x Ø 15mm (
fi
xed focus version)
85mm x Ø 15mm (focusable version)
76mm x Ø 15mm (
fi
xed focus version)
80mm x Ø 15mm (focusable version)
59mm x Ø 15mm (
fi
xed focus version)
63mm x Ø 15mm (focusable version)
Protection category
IP67 incl. optic head (dust-proof / water-proof)
IP54 as ZM12T thread laser (ingress of dust and splash water)
Connection
M12 plug, 4-pin
Integrated cable with
fl
ying leads
Housing
M12 industry housing, chromed brass; with optic head: anodised aluminium
Electrical speci
fi
cations *
Supply voltage
5-30VDC +/- 5%
4-6VDC
Mode of operation
APC with current limiting (or CC)
APC with current limiting
APC with current limiting
Modulation
Continuous wave
TTL up to 100kHz
TTL up to 100kHz
Protection
Reverse polarity and transient / ESD
Optical speci
fi
cations *
Output power
1 - 100mW (depending on wavelength and laser type)
Wavelength
635nm - 785nm
Environmental conditions *
Case temperature
-10°C up to +50°C (heat dissipation with mounting, e.g. H8-M12)
Storage temperature
-10°C up to +70°C
Humidity
Max. 90%, non-condensing
MTTF at 25°C
635 - 785nm > 30.000h
* For further information please take a look on the data sheets. Do you need help? Please contact your country representative or visit us on www.z-laser.com.
* Weitere Informationen
fi
nden Sie auf den Datenblättern. Benötigen Sie Hilfe? Kontaktieren Sie Ihre Landesvertretung oder besuchen Sie uns auf www.z-laser.com.
* Vous trouverez de plus amples informations sur les
fi
ches techniques. Avez-vous besoins d’aide ? Contactez votre distributeur national, ou rendez nous visite sur le site www.z-laser.com.
* Per maggiori informazioni consultare il foglio tecnico speci
fi
co. Per ulteriore supporto contattate l’agente o la nostra sede. Potrete trovare tutte le informazioni sul nostro sito www.z-laser.it.
* Por favor, revise las
fi
chas técnicas para más información. ¿Necesita ayuda? Por favor contacte con el distribuidor de su país o visite www.z-laser.com.
*
青色波長、ＺＭ１2-グリーン等の詳細についてはデータシートを参照下さい。ご不明な点がありましたら、弊社代理店、または直接www.z-laser.comにお問い合わせ下さい。
Con
fi
guration
scheme
and
modulation
Connection options with
cable (KB4)
ZM12B / ZM12TB
(Basic)
Pin 1: Voltage
Pin 2: TTL modulation n/a
Pin 3: Voltage supply -
Pin 4: Analog modulation n/a.; Continuous wave
brown
white
blue
black
ZM12DM / Z ZM12DM5 / ZM12TDM5 *
Pin 2:
TTL
Voltage levels below ~2V are interpreted as logic 0 or “light off”; voltage levels above ~2V are interpreted as logic 1 or “light on”. Please note that the switching threshold can vary slightly.
Pin 4: /
n/a
Modulation
digital TTL up to 100kHz (use black cable of the laser)
General rule
Note that there is a linear characteristic between the two voltages! Both control inputs are tolerant to DC voltages up to 25V, therefore, by applying 24V to the laser, it can easily be switched
on to 100% by bridging pins 1, 2 and 4. There is no need for an extra supply of 1V. You cannot destroy the laser in a 24 Volt system by wrong connections of input pins.
* Attention: the laser type ZM12-DM5 with 3-wires cable can only be supplied with 4-6VDC!
1
2
3
4
1: +
2: TTL
3: -
4: /
1: +
2: /
3: -
4: /
ZM12 series is available with different features *
Die Serie ZM12 ist mit unterschiedlichen Merkmalen verfügbar *
La série M12 est disponible avec des caractéristiques différentes *
La serie ZM12 è disponibile con varie caratteristiche *
La serie ZM12 está disponible con distintas características *
JP
シリーズはさまざまな機能を利用できる
*
Power supply
Netzteil
Alimentation
Alimentatore
Alimentación
電源供給
WPS-5-M12
Mounting
Halterung
Fixation
Supporto
Montura
取付ブラケット
H6-M12
Mounting
Halterung
Fixation
Supporto
Montura
取付ブラケット
H8-M12
Mounting
Halterung
Fixation
Supporto
Montura
取付ブラケット
H2-20
Some available optics • einige erhältliche Optiken • quelques optiques
disponibles • alcune ottiche disponibili • alcune ottiche disponibili •
照射パターン
Cross
Kreuz
Croix
Croce
Cruz
クロス
Parallel lines
Parallele Linien
Lignes parallèles
Linee parallele
Líneas paralelas
平行線
Dotted line
Punkte-Linie
Ligne point
Linea di punti
Línea-punteada
点線
Dot matrix
Punkt Matrix
Point matrice
Matrice di punti
Matriz de puntos
ドットマトリクス
Square
Quadrat
Quarré
Quadrato
Cuadrado
方形
Circle
Kreis
Cercle
Cerchio
Círculo
サークル
Circles
Kreise
Cercles
Cerchi
Círculo
サークル
Accessories • Zubehör • Accessoires • Accessori • Accesorios •
アクセサリー
Line
Linie
Ligne
Linea
Línea
ライン
Cable
Kabel
câble
cavo
Cable
ケーブル
KB4
CAUTION
LASER LIGHT
Avoid direct eye exposure to beam!
(EN 60825-1: 2007)
LASER
RADIATION
Product emits laser
radiation in laser classes:
1, 1M, 2, 2M, 3R, 3B
Thank you for purchasing
a
Z-LASER
product!
www.Z-LASER.com
Adapter
AP-M12
→
Ø 20mm
+
+
1. Warning label is enclosed and should be well visible.
Please pay attention to the laser classes!
(EN 60825-1: 2007) Laser class 3R, 3B and 4 are
intended for integration into complex systems and are not approved for stand-alone operation.
They require a laser protection of
fi
cer who will decide on the necessary legal measures of training,
hazard control and use.
2. a) By rotating the focus ring, the laser projection can be focused (from 100mm up to
∞
).
b) ZM12T:
By using external hexagon key tool, the laser projection can be focused (from 100mm up to
∞
).
3. M12 thread with two nuts for a simple installation in a mounting or a mounting angle.
4. • LED light = Laser on
• No LED light = Laser off / no power
5. M12 connector to provide
fi
xed and secure connection to power supply,
cable or customized solution.
Version with
fl
ying leads connection is also available (ZM12DM5).
6. Fit industrial plug to laser, screw softly by hand (without tool).
About 2mm of the screw thread must be visible, do not
fi
x it any further!
(4)
LED laser operation indicator
(5)
M12 connector
(2)
Focus ring (only -F laser type)
Nut 1
Nut 2
Mounting
H6-M12
Troubleshooting:
• No laser light. Is the plug and/or power supply connected, supply voltage available?
• No laser light. Is the cable damaged / broken or is the power supply/power socket defective?
• No laser light. Are the pins connected correctly?
• Diffuse projection: (If focusable) re-adjust focus ring.
• Diffuse projection: If the optic appears “dirty” - carefully clean with a cotton bud and spirit.
If the above troubleshoots do not solve your problems, it is possible that there is a fault with the electro-
nics or laser diode. If the laser diode is faulty, as per split or weak beam, please return the laser to our
headquarters.
Installation into a mounting
– On the side example with a H6-M12
(alternative angle mounting)
1. Spin nut 1 on to the M12 laser
thread.
2. Screw the laser into the mounting
until you reach nut 1 (alternative: put
into mounting angle).
3. Spin nut 2 from behind and
fi
x softly
both nuts with a M12 device.
Installation into a mounting with Ø 20mm (with adapter AP-M12), as example H2-20
Please do not
fi
x the mounting on to the front of the laser body as pressure can cause damage to the
optics. Please
fi
x the mounting behind the focus ring adjustment.
ZM12 standard version
with optic head Ø15mm
and focus ring
ZM12T thread version
CE-Conformity according to the directives 2004/108/EC and 73/23/ECC excluding connection type.
Intelligent Solutions in Light
