GSM/CDMA/WCDMA/4G(LTE) MOIP Gateway
YX Technical department
~ 29 ~
Add New
Click button Add New to expand the data input area to add new data. Fields are specified as
following:
Data Status: Mark the status of current data record. Option values are Add/Edit. Value Add
means the data is new while value Edit means the data is old.
Destination Prefix: Specify the destination prefix used to bill call. If this prefix is best matched
with a destination of an outgoing call from the port(s), the corresponding tariff will be chosen
to bill the call. The prefix can be a regular expression. For example, [2-8] matches any phone
number which starts with digit 2 to 8. And [0-9] matches all phone numbers.
Tariff: Specify the tariff detail. In the picture, the tariff means 0.001 balance value will be
deduct per 60 seconds.( Please fill in the actual use of the balance)
Click button Submit on the right to save the new data record.
Edit
All the records are displayed in list. Two operations are provided on the right of each record. Click
Edit to expand the current data record to Data Detail Area which is above the Data List.
Click button Submit on the right to save the old data record.
Delete
Click Delete on the right of each record to delete the current record. A message box will be
popped for delete confirmation.
Another shortcut button is also provided on the top right of Data List to delete multiple selected
records in batch. A message box will be popped for confirmation of batch delete.
7.8 USSD Setting
The screenshot below shows the operation mode to send USSD through the MOIP Gateway.
7.8.1 USSD Auto Send
Here set USSD can be automatically sent as needed(For example, you can customize a preferential
voice package by automatic USSD)
