INFORMATION:
•
The clock automatically changes from set-up mode to time display mode if no keys are
pressed for 20 seconds.
•
Explanation for the time zone display:
You can manually adjust the clock to the time zone of a country (up to 1500 km distance to
Frankfurt/Main) where the clock receives the DCF77 signal
but where the actual time
differs from the time received.
If, e.g. the time in a given country is 1 hour ahead of the German time, set the time zone
display to 01. The clock is now DCF77 controlled but the time is one hour ahead.
Daily alarm set-up
•
Press
“MODE”
to switch from time display to A1 display
•
Press and hold the key
“MODE”
for 3 seconds, the flashing alarm time are shown
•
The hour display of the alarm time is flashing. Use
“+“
and
“-“
to select the hour. Press
“MODE”
to confirm.
•
Then follow the minutes. Use
“+“
and
“-“
to select the minutes, Press
“MODE”
to confirm.
•
The same setting as for A2.
Daily alarm on/off
•
1st press
"ALARM"
to activate the alarm 1 with alarm symbol showing.
•
2
nd
press
"ALARM"
cancel the alarm 1, then activate the alarm 2 with alarm symbol
showing
•
3
rd
press
"ALARM"
to activate the alarm 1 and alarm 2 with alarm symbol showing.
•
4
th
press
"ALARM"
cancel all the alarms
INFORMATION:
•
The clock automatically changes from set-up mode to time mode if no keys are pressed for
20 seconds.
•
The alarm sounds for 2 minutes if no key is pressed to stop it.
Snooze function
To activate the snooze function, follow the steps below
•
Press the key
“SNOOZE/LIGHT“
, while the alarm sounds, to activate the snooze function.
•
If the snooze function is activated,
alarm symbol is flashing.
•
The alarm repeat after 5 minutes.
•
The snooze function can be stopped by pressing any key (except the
"SNOOZE/LIGHT
"key).
12/24 hours mode
The time display can be in 12 (AM/PM) or 24 hours mode, please follow the manual set-up to
select
°C/°F temperature display
The temperature display can be in °C or °F, please follow the manual set-up to select.