YTL COX 32T, Owner'S Manual

Page: 7 / 21

- 7 -
STEP 2: Attach Tow Bar to the Hydraulic Reservoir
1. Rotate the support leg 90 degrees towards the front, then attach
the tow bar (#62) to the
hydraulic reservoir using hex bolt M12x100 (#24), flat washer Ø12 (#65) and lock nut M12
(#13).
STEP 3: Attach Beam Assembly to Hydraulic Reservoir
1. Connect the beam (#17) and hydraulic reservoir using hitch pin (#18), then lock the hitch pin
(#18) using R pin (#21).
WARNING: After the slotted nut is
tightened, turn back 1/4 circle to
make sure the wheel can rotate
smoothly and freely. Failure to turn
the slotted nut back will cause the
wheel not to operate correctly