8
LED Functionality
There is an LED on the front of each ProSample that functions as follow
s:
• OFF:
Device power is off, battery is dead, or no program is running
• Solid Green:
Program is running and there are no errors
• Blinking Green:
Program is running, but the battery is getting low
• Solid Red:
An error has occurred. The display should be viewed for more information regarding the cause
of the error
• Blinking Red:
Battery capacity is critically low
Included with each
ProSample
:
• *5 meter suction hose with screw connection and sinker weight
• 10L PE container (only the ProSample PM and the ProSample PM-12)
• Battery
• USB cable
• Two peristaltic pump tubes
• Printed copy of the ProSample Getting Started Guide
*Up to a 30 meter suction hose can be used with any ProSample model.
Please note the following items
are not included with any ProSample
. These items must be purchased separately.
• Bottle sets and distributor arms for the ProSample P and ProSample P-12
• SDI-12 cable for the ProSample P-12 and ProSample PM-12
• Flow signal cable
• Battery charger
• Other accessories such as strainers
Please see the
Replacement Parts and Accessories
section on page 60 for more details and item numbers, including
longer suction hose lengths.
The ProSample User Manual, installation file for YSIConnect, and the ProSample Ordering Guide can be found at
Package Contents
Intended Use and General Overview / Package Contents
