YSI MultiLab 4010P-1W, Operating Manual

Page: 13 / 114

MultiLab 4010-1W Commissioning
ba76141e07 08/2018
13
3 Commissioning
3.1 Scope of delivery

MultiLab 4010-1W / MultiLab 4010P-1W

4 batteries 1.5 V Mignon type AA

Power pack

USB cable (A plug on mini B plug)

Stand

Stand holder

Comprehensive operating manual

Short instructions

CD-ROM with
– USB drivers
– detailed operating manual
– Software MultiLab Importer
3.2 Power supply
The MultiLab 4010-1W is supplied with power in the following ways:

Line power operation via the supplied power pack
A sensor with stirrer can only be operated with line power.

Battery operation (4 batteries, 1.5 V Mignon type AA)

USB operation via a connected USB-B cable
3.3 Initial commissioning
Perform the following activities:

Insert the supplied batteries

For mains operation: Connect the power pack

If necessary, mount the stand

Switch on the meter (see
section 4.2 S
WITCHING ON
, page 19)

Set the date and time (see
section 4.4.5 E
XAMPLE
2
ON NAVIGATION
: S
ETTING THE DATE AND TIME
, page
24)