Transmitting data
MultiLab 4010-1W
84
ba76141e07
08/2018
11
Transmitting data
The meter has the following interfaces:
USB-B interface (
USB Device
)
e.g. to connect a PC
Via the USB-B interface (
USB Device
) you can transmit data to a PC or printer
and update the meter software.
11.1
Transmitting data to a PC
Via the USB-B interface (
USB Device
) you can transmit data to a PC.
PC system require-
ments
Microsoft Windows
(for details, see enclosed installation CD,
Driver
directory)
Installed USB driver for the meter (see CD-ROM or Internet)
Settings for the USB/RS232 interface on the PC and meter in agreement
Program to receive the measurement data on the PC
(e.g. MultiLab Importer, see CD-ROM or Internet)
Installation of the
USB driver
Connecting a PC
Adjusting the set-
tings for the data
transmission
1.
Insert the supplied installation CD in the CD drive of your PC.
or
Download the USB driver from the Internet and unpack the files and
folders.
2.
Start the driver installation (32 bits or 64 bits) suitable for your operat-
ing system.
Follow the Windows installation instructions as necessary.
1.
Connect the MultiLab 4010-1W to the PC via the USB-B interface
(
USB Device
).
The meter is listed as a virtual COM interface among the connections
in the Windows instrument manager.
2.
Set the same transmission data at the meter and PC:
Baud rate: to be selected in the range 1200 ... 19200
Set at the PC only:
– Handshake: RTS/CTS
– Parity: none
– Data bits: 8
– Stop bits: 1
