YSI MultiLab 4010-1W, Operating Manual

Page: 53 / 114

MultiLab 4010-1W Dissolved oxygen
ba76141e07 08/2018
53
7.3.7 Calibration data
The calibration record of the last calibration is available in the menu Calibration
/ Calibration record . To open it in the measured value display, press the
<CAL__>
key.
The calibration records of the last 10 calibrations are available in the menu Cali-
bration / Calibration data storage / Display . To open the Calibration menu in the
measured value display, press the
<ENTER>
key.
Calibration evalua-
tion
After calibration, the meter automatically evaluates the current status of the cal-
6. Switch to the measured value display with
<F1>
/ [ continue ] .
The zero point is calibrated.
The [ZeroCal] status indicator is displayed.
7. Carry out a calibration (see section 7.3.3 C
ALIBRATION PROCEDURES
,
page 49).
The calibration record is automatically transmitted to the interface
after calibrating.
Menu item Setting/
function Explanation
Calibration /
Calibration data stor-
age
/ Display
- Displays the calibration records.
Further options:

Scroll through the calibration
records with
<

><

>
.

Output the displayed calibra-
tion record to the interface with
<F2>
/ [USB output] .

Output all calibration records to
the interface with
<F2__>
[USB output] .

Quit the display with
<F1>
/
[Back] or
<ENTER>
.

Switch directly to the mea-
sured value display with
<M>
.
Calibration /
Calibration data stor-
age
/ Output to
RS232/USB
- Outputs the calibration data stor-
age to the interface (see section
12 T
RANSMITTING DATA
, page
120).