Operation
MultiLab 4010-1W
20
ba76141e07
08/2018
4.4
Navigation
4.4.1
Operating modes
4.4.2
Measured value display
In the measured value display, you can
open the menu for calibration and measurement settings with
<ENTER>
(short keystroke)
open the system menu with the sensor-independent settings by pressing
<ENTER>
Storage & config
for a
<ENTER__>
long keystroke, approx.
2 s).
change the display in the selected measuring screen (e. g. pH
><−
mV) by
pressing
<M>
.
4.4.3
Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
The selection is done with the
<
><
>
keys. The current selection is dis-
played with a frame.
Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with
<ENTER>
. Example:
Operating
mode
Explanation
Measuring
The measurement data of the connected sensor are shown
in the measured value display
Calibration
The course of a calibration with calibration information, func-
tions and settings is displayed
Storing in
memory
The meter stores measuring data automatically or manually
Transmit-
ting data
The meter transmits measuring data and calibration records
to a USB-B interface automatically or manually.
Setting
The system menu or a sensor menu with submenus, set-
tings and functions is displayed
