manualshive.com logo in svg

YSI 1500 Sport, User Manual, Page: 14 / 134

Share
Download
YSI 1500 Sport User Manual Download Page 14

 

 

3

3

3

3----4

4

4

4  

The Remote Communication Port

Remote Communication Port

Remote Communication Port

Remote Communication Port is a 25 pin RS232C serial port. It is used to 

interface with personal computers. 

The Power Switch

Power Switch

Power Switch

Power Switch is a rocker switch that allows you to control power to the 

instrument. 

The Infrared Printer Port

Infrared Printer Port

Infrared Printer Port

Infrared Printer Port is used to transmit data to the optional battery 

powered printer. 

The Power Receptacle

Power Receptacle

Power Receptacle

Power Receptacle is a DC power inlet. The battery charger supplied with 

the SPORT is connected here to recharge the instrument battery. 

IMPORTANT: Probe polarization will be disrupted when power is turned off. 
Time for restabilization will be needed when power is restored. 

3.3 Reagent Preparation 

If you are going to use only the manual mode of operation, the only solution you 
will need to prepare is the Buffer solution as the Reference solution is only used 
as part of the Automatic mode. 

You can prepare the reagent solutions for the SPORT yourself. These reagents, 
along with a mixing bottle and a graduated syringe (3cc), are provided in the 
YSI Model 1504 Starter Kit which must be ordered separately. Please note that 
the reagents in the starter kit may also be ordered separately. 

IMPORTANT: The mixing bottle and Syringe must be cleaned every week. See 
Section 8.2 Preventative Maintenance. 

If your sample measuring protocol requires the total lysis of blood cells, or if 
you are going to preserve the samples in YSI 2372 Preservative Tubes for later 
analysis, you must refer to Appendix D Sample Preservation, for further 
information before proceeding. 

Automatic Mode

Automatic Mode

Automatic Mode

Automatic Mode    

Buffer Solution

Buffer Solution

Buffer Solution

Buffer Solution    

Fill the 500mL mixing bottle with reagent water. Reagent water must be very 
pure. Use high quality deionized or distilled water. Add one package of YSI 
2357 Buffer Concentrate and stir, waiting long enough to be certain that the 
buffer chemicals have completely dissolved.  

Pour buffer solution into the instrument Buffer Bottle. Put the cap back on the 
Buffer bottle and place it back into the instrument. 

Summary of Contents for 1500 Sport







































































































































Reviews:

No comments