background image

Boss X-series  

Instructions for use 

1

youngmangroup.com 

 

1.1 IntroductIon 

Contents 

These Instructions for Use provide information 
on the safe operation of  the BoSS X-Series 
single person micro powered access platforms 
namely the BoSS X2, X3 and X3X. These 
Instructions do not apply to BoSS X3 machines 
with serial numbers between YMG 11001 to 
11300. Operators should read and understand 
all the information contained within this manual 
before operating a BoSS X-Series machine.

Additional copies of  these instructions may also 
be obtained from Youngman Group Ltd., please 
see contact details on the back cover. The 
instructions are also available to download from 
our website at youngmangroup.com.

The information contained in these instructions 
is based on the latest product information at 
the time of  publication. As Youngman Group 
Ltd. operate a policy of  continuous product 
improvement we reserve the right to make 
product changes at any time without obligation.

sectIon 1 - descrIPtIon

Page

1.1

Introduction

1

1.2

Characteristics and description

2

1.3

Intended use

3

1.4

Selection and minimum 
attributes of  operators

4

1.5

Modifications

5

1.6

Terminology

6

sectIon 2 - sPecIfIcatIon

2.1 

Technical data

8

2.2 

Operating site

10

2.2.1 

Ground conditions

10

2.2.2 

Ground flatness

10

2.2.3 

Overhead obstructions

11

2.2.4 

Segregation from other site 
vehicle movements

11

2.3 

Noise and vibrations

11

2.4 

Limitations

11

sectIon 3 – safety rules

12

sectIon 4 – oPeratIng InstructIons

4.1 

Daily checks

14

4.2 

Manoeuvring the platform

15

4.3 

Engaging the brakes

16

4.4 

Battery isolation switch

16

4.5

Entering and leaving the work 
platform

17

4.6 

Handset control unit

18

4.7

Emergency stop

18

4.8

Emergency lowering

19

4.9 

Battery charging

19

sectIon 5 – transPort, handlIng and 

storage

5.1 

Storage

21

5.2 

Loading and unloading

21

5.3 

Lifting

23

5.4 

Preparation for transport

23

sectIon 6 MaIntenance and rePaIr 

record

6.1

Machine labelling

24

6.2 

Maintenance record

26

6.3 

Repairs record

26

6.4 

Examination/tests record

26

6.5 

Daily checks – Operator checklist

28

sectIon 7 Boss X-serIes accessorIes

7.1

Confined Space Guardrail

30

7.2

Bumpers 

31

7.3

Heavy Duty All Weather Cover

31

Summary of Contents for BOSS X Series




















Reviews: