aquaMAX
TM
-Basic 360 Series
2-3. Installing Filters
［
Figure 2-2
］
How to connect filters
1. Check there are 6 fittings for one-touch clip on upper part of where filters have been installed.
>Press down the clip connected to the fitting making a sound like "click".
: The fitting has been already pressed down at the first installation.
: If it's not pressed down, filter can't be fit in.
2. Insert the filter to fix into the marked fitting by making "click" sound.
>After inserted, check the installation by pressing down the up-side head of filter.
>There is a indicating mark at the lower part of filter not to install the filter upside down.
☞
CAUTION : Filter installation upside down causes the system malfunction and water quality problem.
3. For the R.O membrane pack, the one-touch fitting is on the lower part.
Press down the clip by making a sound like "click" and connect the fitting to the external exposed tubing by
making "click" sound.
4. Follow same direction as above 1 and 2 to connect R.O. Pre Pack and R.O. Post Pack except R.O
membrane pack.
12
