background image

 

 

 

Thank you for choosing a Yost Vise.  For future reference please record the following: 

 

Model #: 

ADI-5 

NSN# 

 

Purchase Date: 

_____________ 

Supplier: 

_____________ 

Inspection and Acceptance

 

 

Claims for damage, shortage or errors in shipping must be reported within one (1) day 

following delivery to Buyer. Buyer shall have seven (7) days from the date Buyer 

receives any products to inspect such products and services for defects and 

nonconformance which are not due to damage, shortage or errors in shipping and notify 

Seller, in writing, of any defects, nonconformance or rejection of such products. After 

such seven (7) day period, Buyer shall be deemed to have irrevocably accepted the 

products, if not previously accepted. After such acceptance, Buyer shall have no right to 

reject the products for any reason or to revoke acceptance. Buyer hereby agrees that such 

seven (7) day period is a reasonable amount of time for such inspection and revocation. 

Buyer shall have no right to order any change or modification to any product or services 

previously ordered by Buyer or its representatives or cancel any order without Seller's 

written consent and payment to Seller of all charges, expenses, commissions and 

reasonable profits owed to or incurred by Seller. Specially fabricated or ordered items 

may not be canceled or returned, and no refund will be made. The sole and exclusive 

remedy for merchandise alleged to be defective in workmanship or material would be the 

replacement of the merchandise subject to the manufacturer's inspection and warranty. 

Product Specifications: 

 

1. 

Technical Statistics:   

 

Model 

Item  

Jaw 

Jaw 

Pipe 

Throat 

Number  Number 

Width 

Opening    Capacity   

Depth   

Weight    

ADI-5  

20005  

5”  

  6”  

0.5" – 3"   

3.25"  

27 lb 

 

2.

 

Jaws able to withstand a clamping force of 6,300 pounds or Torque of 149 Ft-Lb 

without distortion of the vise or any components. 

 

Summary of Contents for ADI-5







Reviews: