Yosin EVM-8XA Series Programming Manual Download

Page: 31 / 84

Available Services to Busy Phones

Upon answering or reconnecting a call, whose original destination is a busy phone, the EVM
provides the caller an appropriate service, one of the following.

ADM_5_9903

_[x1xx]

Plays the Personal Busy Prompt if the mailbox owner has already
recorded it. The caller can only leave a message.

Plays the Backup Busy Prompt (

paragraph 13

or 16 depending on the

time period) if the system administrator has already recorded it. The
caller can only leave a message.

Plays the built-in Backup Busy Prompt. The caller can dial to transfer the call or dial #
to leave a message.

Plays the Personal Busy Prompt or the Backup Busy Prompt if

ADM_5_9903

_[x0xx] is specified. The caller can dial to transfer the call or

dial # to leave a message.

Plays the General Busy Prompt if the original destination is not a mailbox
owner's internal phone. The caller can dial to transfer the call.

Plays the Personal Don’t Disturb Greeting if the mailbox has
DND-ON. The caller can only leave a message.

Summary of Contents for EVM-8XA Series





















































































Search results

Summary of Contents for EVM-8XA Series

Reviews:

Related manuals for EVM-8XA Series

Brands by name

Popular brands

Yosin EVM-8XA Series, Programming Manual

Search results

Summary of Contents for EVM-8XA Series

Reviews:

Related manuals for EVM-8XA Series

Brands by name

Popular brands