background image

 

EPDT-193e

 

 

 

MODEL AL-150T series and AL-140T series 

SAFETY RELIEF VALVE 

 

PRODUCT MANUAL

 

.

 

Thank you very much for choosing the Yoshitake’s product.    To ensure the correct and safe use of the product, 

please read this manual before use.    This manual shall be kept with care for future references. 
The symbols used in this manual have the following meanings. 

 

          Warning 

This  symbol  indicates  a  potentially  hazardous  situation  that,  if  not  avoided, 
could result in death or serious injury. 

          Caution 

This symbol indicates a hazardous situation that, if not avoided, may result in 
minor or moderate injury or may result in only property damage. 

 

 

Table of Contents 

 

1. Usage of the Product ·················································· 1 

2. Specifications···························································· 1 

3. Dimensions and Weight ··············································· 2 

4. Structure   ································································ 3 

5. Operation   ······························································· 3 

6. Nominal Size Selection Table ········································ 4 

6.1 For air (at 20˚C) ··················································· 4 

6.2 For water (

at 20˚C,

 

accumulation: 25%) ····················· 4 

7. Installation ································································ 5 

7.1 Piping example ···················································· 6 

8. Maintenance ····························································· 6 

8.1 Daily inspection ··················································· 7 

8.2 Regular inspection ··············································· 7 

8.3 Troubleshooting ··················································· 7 

8.4 Procedure for set pressure adjustment ······················ 9 

Warranty Information 

 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for AL-150T Series











Reviews: