visit us @ www.ardaappliances.com
pg 6
Before You Start...
1. Read this manual carefully and completely.
2. ARDA range hoods conform to ETL/CSA standards.
WůĞĂƐĞĐŚĞĐŬLJŽƵƌůŽĐĂůďƵŝůĚŝŶŐĐŽĚĞƐĨŽƌĂŶLJĂĚĚŝƟŽŶĂů
ƌĞƋƵŝƌĞŵĞŶƚƐ͘
3. The appliance has been manufactured as class I, there-
ĨŽƌĞŐƌŽƵŶĚĐŽŶŶĞĐƟŽŶŝƐŶĞĐĞƐƐĂƌLJ͘ϭϭϱsƉůƵŐŝƐ
provided. The range hood must be installed so that that
the plug is easily accessible.
4. This appliance has been designed for use in both ducted
ĂŶĚƌĞĐŝƌĐƵůĂƟŶŐŵŽĚĞƐ͘&ŽůůŽǁƚŚĞĂƉƉƌŽƉƌŝĂƚĞŝŶƐƚĂůůĂ
-
ƟŽŶŵĞƚŚŽĚ͘
I
ŶƐƚĂůůĂƟŽŶ/ŶƐƚƌƵĐƟŽŶƐ
Planning Your Installation
1.
DĞĂƐƵƌĞƚŚĞŇŽŽƌƚŽĐĞŝůŝŶŐŚĞŝŐŚƚ͘
This hood can be installed on walls
between 8” and 9” tall.
2.
&ŝŶĚƚŚĞĐĞŶƚƌĞƉŽŝŶƚŽĨLJŽƵƌƌĂŶŐĞͬ
cooktop. Drop a plumb line from
your ceiling to this point on your
cooking surface.
DĂƌŬƚŚĞĐĞŝůŝŶŐ
ǁŚĞƌĞƚŚĞƉůƵŵďůŝŶĞƐƚĂƌƚƐ͘
3.
Around this point, install cross brac-
ing between the ceiling joists for
the island hood to mount to.
4.
Check your range/cook-top
User
Manual
ĨŽƌƚŚĞƐƉĞĐŝĮĞĚŵŝŶŝŵƵŶ
and maximum distance above your
cooking suface. The minimum
distance between any element or
ŇĂŵĞŚĞŝŐŚƚĂŶĚƚŚĞŶĞĂƌĞƐƚĐŽŵ
-
bustable surface is 61cm (24”).
5.
Decided where the ductwork will
run between the hood and the out-
side. Short, straight duct runs will
ƉƌŽǀŝĚĞƚŚĞŵŽƐƚĂŝƌŇŽǁ͘
Floor to
ceiling
Center of
cooking
surface to
ceiling
Ceiling duct opening
Ceiling joists &
cross-bracings
/^>EDKhEd,KK^
