➲
350 Watt Powered Speaker
➲
10-inch Neodymium Woofer / 1-inch Driver
➲
Solid Plywood Cabinet Construction
➲
Internally Biamped
➲
65 - 20k Frequency Response (Hz +/- 3db)
➲
Metal Handle & Standmount Adaptor
➲
Crossover Frequency 1500 Hz
The E10P is an advanced, compact two-way active loudspeaker designed for a wide variety
of pro-audio applications. Innovative processing is built-in to ensure optimum performance
and clarity.
Built for maximum versatility, the E10P input section will easily handle microphone or line level
inputs through the XLR / TRS Combi-jack. Bass and Treble EQ in addition to Level control and
a Mic/Line input gain selector ensure the E10P can handle virtually any audio source. A
Live/Playback EQ preset selector, a 100Hz/50Hz low-frequency Roll-off selector (no crossover
needed for subs), a full-time Limiter with LED indicator, a Clip LED, a Link output ensure the
E10P can adapt easily to any audio application including use as a front-of-house PA
loudspeaker, as a personal wedge monitor or as a single unit micro PA for a paging and
playback system (no additional mixer required).
A lightweight, low-noise 300-Watt Class-D amplifier drives the low frequency 10-inch
woofer while a two-tier 50-Watt amplifier capable of delivering an exceptionally clear and
linear high-frequency response powers the 1-inch horn. An on-board active DSP based
crossover ensures that the woofer and horn operate optimally while protecting the high
quality speaker components.
The E10P features a powerful yet lightweight 10-inch low-frequency driver with a neodymium
magnet, a silky-smooth 1-inch horn and an enclosure built from void-less 25mm multi-ply wood
for lightweight with classic Elite ruggedness. That durability is engineered into the multi-angle
enclosure pioneered for the Elite line that enables the E10P to operate vertically on a stand or
horizontally as a stage monitor. For added convenience, the E10P easily converts between
120VAC, 230VAC or 240VAC.
élite
L10P
10-inch Powered Speaker
élite
E10P
Features:
Overview:
y o r k v i l l e . c o m
E10P Specifications:
Model
E10P
SYSTEM TYPE
Powered Loudspeaker
ACTIVE OR PASSIVE
Active
PROGRAM POWER (WATTS)
350
BIAMPABLE
Internally Biamped
FREQUENCY RESPONSE (HZ +/- 3DB)
65 - 20k
CROSSOVER FREQUENCY (HZ)
1500
DRIVER CONFIGURATION
10-inch / 1-inch
HF PROGRAM POWER (WATTS)
50
HF IMPEDANCE (OHMS)
8
HF DISPERSION (°H X °V)
100 x 25
HF PROTECTION
Peak and Average Limiting
LF PROGRAM POWER(WATTS)
300
LF IMPEDANCE(OHMS)
4
LF PROTECTION
Excursion, RMS
TOTAL POWER (WATTS)
350
COOLING SCHEME
Convection
POWER CABLE
Removable IEC
POWER SWITCH
Yes
POWER CONSUMPTION (TYP/MAX)
120VA / 200VA
INPUTS
1 Combijack (XLR / 1/4-inch)
INPUT IMPEDANCE (BAL/UNBAL)
4k ohms / 2k ohms
INPUT SENSITIVITY (VRMS SINE)
Line in 1.4 at center, 0.35 at max
LEVEL CONTROLS
Gain
EQ CONTROLS
Bass, Treble
LIMITER
Peak and Average limiting on horn and woofer
LED INDICATORS
Power, Clip
CORNERS
Metal
FEET
Plastic Glides
FLYING HARDWARE
5 (2 Top, 2 Bottom, 1 Pullback)
BAR HANDLES
One Side
POLE MOUNT ADAPTER (1 3/8"-3.5CM)
Yes
ENCLOSURE MATERIALS
15mm (5/8-inch) 11-ply Russian Birch
PORT(S)
Rear
GRILLE
Perforated Metal
COVERING / FINISH
Black Ozite (Carpet)
OPTIONAL COVERING / FINISHES
Black Ultrathane Paint (E10PB)
DIMENSIONS (DWH XBACKW, INCHES)
12 x 13 x 18.5 x 5.5
DIMENSIONS (DWH XBACKW, CM)
30 x 33 x 45 x 14
WEIGHT (LBS/KG)
34 / 15.5
Specifications subject to change without notice.
