York YD Mod D, Operation Manual, Page: 24 / 160

Y.OPT.11.xx.yzz:
• Y – Commercial chiller
• OPT - Used on Microboard 031-03630-007
• 11 – YD chiller
• xx - controls revision level (00, 01, etc.)
• y – language package (0=English only, 1=NEMA, 2=CE, 3=NEMA/CE )
• zz – language package revision level (00, 01, etc.)
OptiView control center in detail
The OptiView™ Control Center display is highlighted by a full screen graphics display. This display
is nested within a standard keypad, and is surrounded by soft keys, which are redefined based
on the currently displayed screen. Eight buttons are available on the right side of the panel, and
are primarily used for navigation between the system screens. At the base of the display are 5
additional buttons. The area to the right of the keypad is used for data entry with a standard
numeric keypad provided for entry of system setpoints and limits.
Figure 3: OptiiView™ control center
The Decimal key provides accurate entry of setpoint values.
Use the ± key to enter negative values and select AM/PM during time entry.
In order to accept changes made to the chiller setpoints, use the Check key as a
universal Enter key or Accept symbol.
In order to reject entry of a setpoint or dismiss an entry form, use the
X key as a
universal Cancel symbol.
Use the cursor
Arrow keys to navigate on screens that contain a large amount of
entry data. In addition, use these keys to scroll through history and event logs.
Model YD Mod D with OptiView Control Center 24