• The unit must be “blocked” so that the base is not permitted to sag or bow.
• Ensure that all openings, such as water connections, are securely capped.
• Do not store where exposed to high ambient air temperatures that may exceed relief valve settings.
• The condensers should be covered to protect the coils and fins from potential damage and corrosion,
particularly where building work is in progress.
• The unit should be stored in a location where there is minimal activity in order to limit the risk of
accidental physical damage.
• To prevent inadvertent operation of the pressure relief devices the unit must not be steam cleaned.
• It is recommended that the unit is periodically inspected during storage.
OPERATING AND STORAGE CONDITIONS
Standard leaving chilled water temp: 5~20°C
Standard ambient at cooling mode: 10~48°C
Standard leaving hot water temp.: 25~55°C
Ambient temp. at heating mode: -15~25°C
Unit storage ambient temp.: -20~55°C
INSPECTION
Remove any transit packing and inspect the unit to ensure that all components have been delivered
and that no damage has occurred during transit. If any damage is evident, it should be noted on the
carrier’s freight bill and a claim entered in accordance with the instructions given on the advice note.
Major damage must be reported immediately to your local Johnson Controls representative.
MOVING THE UNIT BY FORKLIFT TRUCKS
For models of YCAE065-130, it is recommended that the units are moved by forklift trucks for transit
transfer. A wooden pallet is added for forklift use before shipment.
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz
